Microcement for Homeowners: Is It Right for Your Renovation?
Share
You have been seeing it everywhere — that smooth, seamless finish on bathroom walls, kitchen floors, and living room surfaces. No grout lines. No tile edges. Just one continuous, modern surface.
That is microcement. And if you are thinking about it for your home, here is what you need to know before moving forward.
What You Are Getting
Microcement is a thin, cement-based coating applied over your existing surfaces. The result is a seamless, waterproof finish that works on floors, walls, countertops, showers, and more.
It looks like polished concrete or natural stone, but it is only 2–3mm thick — which means it goes right over your existing tile, concrete, or other surfaces. In most cases, no demolition is needed.
The finish is handcrafted. A trained installer applies it by trowel, layer by layer. The subtle variations in tone and texture are part of what makes it look so good. No two surfaces are exactly alike.
The Biggest Benefits for Homeowners
No more grout. This is the number one reason homeowners choose microcement. Grout stains, molds, cracks, and looks dated over time. Microcement eliminates it entirely.
No demo needed. In most renovations, the installer can apply microcement directly over your existing tile or concrete. That saves you money on demolition and disposal, reduces the mess and noise in your home, and shortens the project timeline significantly.
It is waterproof. Microcement USA products are waterproof through the full system, which makes them perfect for showers, bathrooms, and kitchens.
It lasts. When professionally installed, microcement lasts 15–25+ years with basic care.
It looks incredible. The seamless, spa-like look works in contemporary, minimalist, industrial, Scandinavian, and Mediterranean interiors.
Where to Use It in Your Home
The most popular homeowner applications: bathroom floors and walls — especially showers — kitchen floors and countertops, open-concept living area floors, feature walls and fireplace surrounds, pool decks and outdoor patios, and stairs.
Many homeowners start with a bathroom and end up doing the kitchen and living areas once they see the result.
What It Costs
For a professionally installed microcement surface, expect $30–$75+ per square foot. The total depends on your project size, the complexity of the surfaces, the condition of the existing substrate, and color and finish choices.
A typical bathroom renovation with microcement might run $4,500–$12,000 depending on scope. That is competitive with a mid-to-high-end tile renovation — and you get a better result with less disruption.
What About Maintenance?
Microcement is low maintenance. Here is the routine:
- Sweep or vacuum regularly
- Mop with a pH-neutral cleaner
- Wipe up spills promptly — especially acidic liquids like wine or lemon
- Reseal every few years — the installer can advise on timing
What to avoid: bleach, vinegar, abrasive pads, and steam cleaners. Stick to gentle products and the surface stays beautiful.
How to Find an Installer
This is the most important decision you will make. The quality of the installation determines how your microcement looks and lasts.
Microcement USA only sells products to certified installers who have completed our hands-on training. Every Microcement USA installer knows the system, understands the products, and has practiced the technique.
Contact us and we will connect you with a certified installer in your area. If you already have a contractor you love — a painter, tiler, or remodeler — ask them about getting trained with Microcement USA.
Certified installers are working in Texas, Florida, Arizona, California, Georgia, New York, and more. Find a certified installer near you.
Common Homeowner Questions
Can I do it myself? We do not recommend it. Microcement requires trained technique, proper substrate assessment, and the right products. DIY kits often lead to failures. This is a job for a certified professional.
Is it slippery? In matte and textured finishes, no. For shower floors and outdoor areas, slip-resistant textures are available.
Will it crack? Not when installed correctly using the Microcement USA system. The system is designed with flexibility to handle minor substrate movement.
Can I change the color later? Yes — microcement can be recoated with a new color in the future. It is not a permanent, unchangeable decision.
How long does installation take? A typical bathroom is 3–5 days. A kitchen floor might be 2–3 days. Drying and curing add a few more days before you can use the space normally.
Working with Designers and Builders
If you are working with an interior designer, they can help you spec the right color, finish, and scope. Share our guide for designers with them — it covers exactly how microcement gets specified and installed in design projects.
If your contractor or builder has not worked with microcement before, point them toward our guide for builders. They can get trained quickly and be ready for your project.
Ready to Start?
If you are planning a renovation and want a finish that looks modern, performs well, and lasts — microcement is worth exploring.
Find a certified Microcement USA installer who can bring this finish to your home.